Automotive
Imaging
Medical
Industrial

  • SX proFRAME – Base Boards

Trade Shows
MedtecLIVE, Nürnberg, April 20-22, 2021 > to the websiteembedded world 2021, Nürnberg, March 01-05, 2021 > to the websitevirtual.MEDICA 2020, online > to the Solectrix profile
You are here: > > > Base Boards

SX proFRAME Base Boards

FPGA-based core of the proFRAME grabber system

The core of each SX proFRAME system is a base board module with a high-performance FPGA by Xilinx. The board’s FPGA-based real-time data processing enables the handling of large amounts of data independent from any other hardware requirements.

Base Boards are available in PCI Express and CompactPCI Serial (from version 3.0 on) formats.

Product

SX proFRAME Base Board 3.0 CompactPCI Serial

Art. No. 500911

The third generation of SX proFRAME base boards debuts in CompactPCI Serial form, offering four times the data rates of its predecessor to support state-of-the-art automotive cameras.

The new SX proFRAME Base Board is built around a Xilinx Zynq UltraScale+ ZU4CG MPSoC, enabling increased data transfer rates of up to 40 Gbit/s for each of its new-type camera adapter interfaces.

The corresponding SX camAD3 adapter modules take advantage of this, offering up to four camera inputs or outputs on a single adapter. proFRAME 3.0 adapters using GMSL2, GMSL3, FPD-Link III and FPD-Link IV (de)serializers are available or currently in development.

  • 2× SX camera adapter 3.0 interfaces, each max. 40 Gbit/s video data interface
    • 4× CSI-2 interfaces 4 lanes each up to 2.5 Gbit/s.
      Total 40 Gbit/s or
      23× LVDS data lanes each up to 1.6 Gbit/s.
      Total 36.8 Gbit/s
    • 1× I2C interface to serializer and deserializer chips
    • 1× I2C interface to internal devices
      (e.g., EEPROM, interface FPGAs, PoC pot, …)
    • 1× SPI interface to serializer and deserializer chips
    • 5 to 24V supply for Power over Coax (PoC)
    • FSYNC trigger, interrupt, reference clock and other
      GPIO signals
  • PCIe x8 Gen3 interface (64 Gbit/s) to CompactPCI Serial backplane
  • Xilinx Zynq UltraScale+ ZU4CG MPSoC (FBVB900)
  • 2 GB DDR4 of PS (processing system) memory, up to 150 Gbit/s
  • CompactPCI Serial 3U form factor
  • Temperature range: −20 to +85 °C
  • Planned adapters:
    • GMSL2: Maxim MAX9295A/MAX9296A
    • GMSL3: Maxim MAX967xx
    • FPD-Link III: Texas Instruments TI953/954
    • FPD-Link IV: Texas Instruments TI9xx/TI9xx

Product

SX proFRAME 3.0 Base Board 3.0 PCIe

Art. No. 500884

All the advanced features of the CompactPCI Serial version, but realized as a PCI Express board for regular PC systems.Fully compatible with the new SX camAD3 camera adapter line.

  • 2× SX camera adapter 3.0 interface, each max. 40 Gbit/s video data interface
  • PCIe x8 Gen3 Interface (64 Gbit/s)
  • Xilinx Zynq UltraScale+ ZU4CG MPSoC (FBVB900)
  • 2 GB DDR4 of PS (processing system) memory, up to 150 Gbit/s
  • PCI Express form factor, board dimensions: 175.26 mm × 106.68 mm (full height, half length)
  • Temperature range: −20 to +85 °C
Product

SX proFRAME Base Board 2.0

Art. No. 500691

The standard version of the SX proFRAME base board 2.0 supports data rates of up to 3.2 Gbit/s.

  • 4× SX camera adapter interface
    • 2× on top
    • 2× on bottom
  • PCIe Gen2 x1/x4 interface
  • Xilinx Artix-7 FPGA (XC7A200T)
    • 215,360 logic cells
    • 740 DSP slices
    • 12.83 Mbit block RAM
  • Up to 512 MByte on-board DDR3 frame buffer memory
  • Board dimensions: 195 mm × 110 mm, in-between a half-length and full-length PCIe board
  • Optional: 12V external supply input instead of power via PCIe
  • Optional: External supply input for Power over Coax (PoC)
Product

SX proFRAME Base Board 2.0 LVDS

Art. No. 500816

This customized revision of the SX proFRAME base board 2.0 features an LVDS connection to the SX camera adapter ports, enabling support for higher data rates of up to 6 Gbit/s.

  • 2× SX high-speed adapter interface
    • 2× on top
  • 4× SX camera adapter LVDS interface, up to 6 Gbit/s
    • 2× on top
    • 2× on bottom
  • Other technical specs and options identical to standard SX proFRAME Base Board 2.0.
Product

SX proFRAME Base Board 2.0 HS

Art. No. 500708

A revision of the SX proFRAME base board 2.0 that features two additional high-speed connectors, enabling higher data rates for the connection of Solectrix’s CoaXPress camera adapters.

  • 2× SX high-speed adapter interface
    • 2× on top
  • 4× SX camera adapter interface
    • 2× on top
    • 2× on bottom
  • PCIe Gen2 x1/x4 interface
  • Xilinx Artix-7 FPGA (XC7A200T)
    • 215,360 logic cells
    • 740 DSP slices
    • 12.83 Mbit block RAM
  • Up to 512 MByte on-board DDR3 frame buffer memory
  • Board dimensions: 195 mm × 110 mm, in-between a half-length and full-length PCIe board
  • Optional: 12V external supply input instead of power via PCIe
You are here: > > > Base Boards