• proFRAME Product Archives

Trade Shows
AutoSens, Brussels, September 19–21, 2023 > more informationMEDICA, Düsseldorf, November 13–16, 2023 > more information

Legacy Base Boards

Not recommended for new designs!

Form factor

PCI Express, 195 × 119 mm (in-between a half-length and full-length PCIe board)

Camera adapter interfaces

Product

SX proFRAME Base Board 2.0

Art. No. 500691

The standard version of the SX proFRAME base board 2.0 supports data rates of up to 3.2 Gbit/s.

  • 4× SX camera adapter interface
    • 2× on top
    • 2× on bottom
  • PCIe Gen2 x1/x4 interface
  • Xilinx Artix-7 FPGA (XC7A200T)
    • 215,360 logic cells
    • 740 DSP slices
    • 12.83 Mbit block RAM
  • Up to 512 MByte on-board DDR3 frame buffer memory
  • Board dimensions: 195 mm × 110 mm, in-between a half-length and full-length PCIe board
  • Optional: 12V external supply input instead of power via PCIe
  • Optional: External supply input for Power over Coax (PoC)
Product

SX proFRAME Base Board 2.0 LVDS

Art. No. 500816

This customized revision of the SX proFRAME base board 2.0 features an LVDS connection to the SX camera adapter ports, enabling support for higher data rates of up to 6 Gbit/s.

  • 2× SX high-speed adapter interface
    • 2× on top
  • 4× SX camera adapter LVDS interface, up to 6 Gbit/s
    • 2× on top
    • 2× on bottom
  • Other technical specs and options identical to standard SX proFRAME Base Board 2.0.
Product

SX proFRAME Base Board 2.0 HS

Art. No. 500708

A revision of the SX proFRAME base board 2.0 that features two additional high-speed connectors, enabling higher data rates for the connection of Solectrix’s CoaXPress camera adapters.

  • 2× SX high-speed camera adapter interface, up to 6.6 Gbit/s
    • 2× on top
  • 4× SX camera adapter interface
    • 2× on top
    • 2× on bottom
  • PCIe Gen2 x1/x4 interface
  • Xilinx Artix-7 FPGA (XC7A200T)
    • 215,360 logic cells
    • 740 DSP slices
    • 12.83 Mbit block RAM
  • Up to 512 MByte on-board DDR3 frame buffer memory
  • Board dimensions: 195 mm × 110 mm, in-between a half-length and full-length PCIe board
  • Optional: 12V external supply input instead of power via PCIe

Legacy Camera Adapters

Not recommended for new designs!

Product

SX camAD TI913/914

Art. No. 500611

  • Texas Instruments DS90UB913A-Q1

    FPD-Link III serializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • Texas Instruments DS90UB914A-Q1

    FPD-Link III deserializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • Camera input & output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL TI914

Art. No. 500626

  • 2x Texas Instruments DS90UB914A-Q1

    FPD-Link III deserializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC, 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI925/926

Art. No. 500637

  • Texas Instruments DS90UB925Q-Q1

    24-bit color FPD-Link III serializer with bidirectional control channel, 5 to 85 MHz

  • Texas Instruments DS90UB926Q

    24-bit color FPD-Link III deserializer with bidirectional control channel, 5 to 85 MHz

  • Camera input and output on RosenbergerHSD plugs (D4S20G-400A5-Z)
  • Matching base boards:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI933/934

Art. No. 500640

  • Texas Instruments DS90UB933-Q1

    FPD-Link III serializer for 1 MP/60 fps and 2 MP/30 fps cameras, 12-bit 100 MHz

  • Texas Instruments DS90UB934-Q1

    FPD-Link III deserializer for 1 MP/60 fps and 2 MP/30 fps cameras, 12-bit 100 MHz

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI935/936

Art. No. 500862

  • Texas Instruments DS90UB935-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3 Gbit/s

  • Texas Instruments DS90UB936-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI936

Art. No. 500873

  • Texas Instruments DS90UB936-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL TI953

Art. No. 500639

  • 2× Texas Instruments DS90UB953-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3.2 Gbps

  • 2× camera output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI953/954

Art. No. 500657

  • Texas Instruments DS90UB953-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3.2 Gbps

  • Texas Instruments DS90UB954-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • Kamera-Eingang und Ausgang auf Rosenberger-FAKRA-Steckern (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI954

Art. No. 500685

  • Texas Instruments DS90UB954-Q1

    Dual MIPI CSI-2 FPD-Link III deserializer for 2 MP/60 fps cameras and RADAR

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL MAX9240A

Art. No. 500628

  • 2× Maxim MAX9240A

    25-bit GMSL deserializer, 6.25 to 100 MHz, with line fault detect

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9240A/9271

Art. No. 500631

  • Maxim MAX9240A

    25-bit GMSL deserializer, 6.25 to 100 MHz, with line fault detect

  • Maxim MAX9271

    16-bit GMSL serializer, 6.25 to 100 MHz

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96705/96706

Art. No. 500683

  • Maxim MAX96705

    16-bit GMSL serializer with high-immunity/bandwidth mode

  • Maxim MAX96706

    14-bit GMSL deserializer

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9295A/9296A

Art. No. 500798

  • Maxim MAX9295A

    MIPI CSI-2 GMSL2 serializer with pixel mode, up to 6 Gbps

  • Maxim MAX9296A

    MIPI CSI-2 GMSL2 dual deserializer with pixel mode, up to 6 Gbps

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9296A

Art. No. 500783

  • Maxim MAX9296A

    MIPI CSI-2 GMSL2 dual deserializer with pixel mode, up to 6 Gbps

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96716A/96717

Art. No. 500978

  • Maxim MAX96716A

    MIPI CSI-2 GMSL2 dual deserializer with tunneling mode, up to 6 Gbps

  • Maxim MAX96717

    MIPI CSI-2 GMSL2 serializer with tunneling mode, up to 6 Gbps

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96716A

Art. No. 500946

  • Maxim MAX96716A

    MIPI CSI-2 GMSL2 dual deserializer with tunneling mode, up to 6 Gbps

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD CoaXPress

Art. No. 500721

  • Microchip EQCO31R20
    • Coaxial cable video equalizer for bidirectional communication
    • 1.25 to 3.125 Gbps video downlink
    • Supports 8b/10 NRZ coding and the CoaXPress standard
  • Camera input on coax connector (Cinch Connectivity Solutions UCBJE20-1)

    Power over Coax (PoC), 18 V, 1 A

  • Atmel ATtiny85 microcontroller

    for control of Power over Coax (PoC) supply voltage

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL CoaXPress

Art. No. 500722

  • 2× Microchip EQCO62R20
    • Coaxial cable video equalizer for bidirectional communication
    • 1.25 to 3.125 Gbps video downlink
    • Supports 8b/10 NRZ coding and the CoaXPress standard
  • 2× camera input on coax connectors (Cinch Connectivity Solutions UCBJE20-1)

    Power over Coax (PoC), 18 V, 1 A

  • 2× Atmel ATtiny85 microcontroller

    for control of Power over Coax (PoC) supply voltage

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Accessories

proFRAME SYNC

proFRAME 2.0 SYNC IN/OUT
proFRAME 2.0 SYNC DUAL IN

The proFRAME SYNC adapters are galvanically isolated interfaces. They make it possible to obtain sync signals for camera triggering from external trigger sources and to generate trigger signals in our proFRAME boards. These signals can be sent to cameras or external trigger receivers. Our adapters are available as In/Out and Dual In.