back to overview
Product

0,00 €

Categories: , ,

proFRAME Base Board 3.1 PXIe

FPGA-based proFRAME 3.1 Base Board with two slots for swappable camAD3 camera adapters, form factor PXIe.

  • 2× camAD3 camera adapter interface, each max. 40 Gbit/s video data interface
    • 4× CSI-2® interfaces 4 lanes each up to 2.5 Gbit/s.
      Total 40 Gbit/s or
      23× LVDS data lanes each up to 1.6 Gbit/s.
      Total 36.8 Gbit/s
    • 4× I2C interface (1 MBaud) to serializer and deserializer chips
    • 1× I2C interface to internal devices
      (e.g., EEPROM, interface FPGAs, PoC pot, …)
    • 1× SPI interface to serializer and deserializer chips
    • 5 to 24V supply for Power over Coax (PoC)
    • FSYNC trigger, interrupt, reference clock and other
      GPIO signals
  • PCIe® x8 Gen3 Interface (64 Gbit/s)
  • AMD Zynq™ UltraScale+™ ZU4CG MPSoC (FBVB900)
  • Processing subsystem: Dual-core Arm® Cortex™-A53 MPCore™ up to 1.3 GHz
  • 2 GB DDR4 of PS (processing system) memory, up to 150 Gbit/s
  • PCI Express® form factor, 3U module, board dimensions: 196 mm × 130 mm × 20 mm
  • Temperature range: 0 to +55 °C

Read more about this model in our proFRAME blog post “New: proFRAME Base Board 3.1 PXIe”.

Matching accessories:

Matching adapters:

A-PHY®:

ASA Motion Link:

CSI-2:

FPD-Link™ IV:

FPD-Link™ III:

GMSL3™:

GMSL2™:

GMSL1™:

GVIF3:

HDMI:

proFRAME is a registered trademark of Solectrix GmbH. All other trademarks are the property of their respective owners.

back to overview