• proFRAME Base Boards

Trade Shows
MedtecLIVE, Stuttgart, June 18–20, 2024 Hall 1, Booth 536 > more information
iVT Expo, Cologne, June 26–27, 2024 > more information
You are here: > > > Base Boards

Base Boards

FPGA-based core of the proFRAME grabber system

The core of the proFRAME modular frame grabber system is the base board, a plug-in card with a powerful FPGA for real-time data processing and precise time stamping featuring slots for proFRAME camera adapters for connection of up to 8 cameras. Depending on the hardware generation and product variant, different adapters are supported.

The following types of proFRAME 3.0 Base Boards are available:

Overview proFRAME 3.0 Base Boards

Follow a manual added link

proFRAME
Base Board 3.0
CompactPCI Serial

Follow a manual added link

proFRAME
Base Board 3.0
PCIe

Follow a manual added link
Follow a manual added link
Follow a manual added link
More details
Follow a manual added link
More details
Product

proFRAME Base Board 3.0 CompactPCI Serial

The third generation of proFRAME base boards made its debut in CompactPCI® Serial (CPCI-S.0) form, offering four times the data rates of its predecessor to support state-of-the-art automotive cameras.

The Base Board is built around a AMD Zynq™ UltraScale+™ ZU4CG MPSoC, enabling increased data transfer rates of up to 40 Gbit/s for each of its new-type camera adapter interfaces.

The corresponding camAD3 adapter modules take advantage of this, offering up to four camera inputs or outputs on a single adapter. proFRAME 3.0 adapters using GMSL2™, GMSL3™, FPD-Link™ III and FPD-Link™ IV (de)serializers are available or currently in development.

  • 2× camAD3 camera adapter interfaces, each max. 40 Gbit/s video data interface
    • 4× CSI-2® interfaces 4 lanes each up to 2.5 Gbit/s.
      Total 40 Gbit/s or
      23× LVDS data lanes each up to 1.6 Gbit/s.
      Total 36.8 Gbit/s
    • 4× I2C interface (1 MBaud) to serializer and deserializer chips
    • 1× I2C interface to internal devices
      (e.g., EEPROM, interface FPGAs, PoC pot, …)
    • 1× SPI interface to serializer and deserializer chips
    • 5 to 24V supply for Power over Coax (PoC)
    • FSYNC trigger, interrupt, reference clock and other
      GPIO signals
  • PCIe® x8 Gen3 interface (64 Gbit/s) to CompactPCI® Serial backplane
  • AMD Zynq™ UltraScale+™ ZU4CG MPSoC (FBVB900)
  • Processing subsystem: Dual-core ARM® Cortex™-A53 MPCore™ up to 1.3 GHz
  • 2 GB DDR4 of PS (processing system) memory, up to 150 Gbit/s
  • CompactPCI® Serial (CPCI-S.0) 3U form factor
  • Temperature range: −20 to +85 °C
Product

proFRAME Base Board 3.0 PCIe

All the advanced features of the CompactPCI® Serial version, but realized as a PCI Express® board for regular PC systems. Fully compatible with the new camAD3 camera adapter line.

  • 2× camAD3 camera adapter interface, each max. 40 Gbit/s video data interface
    • 4× CSI-2® interfaces 4 lanes each up to 2.5 Gbit/s.
      Total 40 Gbit/s or
      23× LVDS data lanes each up to 1.6 Gbit/s.
      Total 36.8 Gbit/s
    • 4× I2C interface (1 MBaud) to serializer and deserializer chips
    • 1× I2C interface to internal devices
      (e.g., EEPROM, interface FPGAs, PoC pot, …)
    • 1× SPI interface to serializer and deserializer chips
    • 5 to 24V supply for Power over Coax (PoC)
    • FSYNC trigger, interrupt, reference clock and other
      GPIO signals
  • PCIe® x8 Gen3 Interface (64 Gbit/s)
  • AMD Zynq™ UltraScale+™ ZU4CG MPSoC (FBVB900)
  • Processing subsystem: Dual-core ARM® Cortex™-A53 MPCore™ up to 1.3 GHz
  • 2 GB DDR4 of PS (processing system) memory, up to 150 Gbit/s
  • PCI Express® form factor, board dimensions: 175.26 mm × 106.68 mm (full height, half length)
  • Temperature range: −20 to +85 °C
You are here: > > > Base Boards

proFRAME is a registered trademark of Solectrix GmbH. All other trademarks are the property of their respective owners.

Contact