• proFRAME Accessories

Trade Shows
AutoSens, Brussels, September 19–21, 2023 > more informationMEDICA, Düsseldorf, November 13–16, 2023 > more information
You are here: > > > Accessories

Accessories

Accessories

proFRAME SYNC

proFRAME 3.0 SYNC IN/OUT
proFRAME 3.0 SYNC DUAL IN

The proFRAME SYNC adapters are galvanically isolated interfaces. They make it possible to obtain sync signals for camera triggering from external trigger sources and to generate trigger signals in our proFRAME boards. These signals can be sent to cameras or external trigger receivers. Our adapters are available as In/Out and Dual In.

Product

ledAD3 Base

Base LED adapter plug-in module for the installation on a proFRAME 3.0 Base Board PCIe. Designed for use as power source for an illumination LED in sync with a camera that is connected to a camera adapter module (camAD3) on the same Base Board.

  • One of up to 2 independent LED driver interfaces (ledAD3 Base + ledAD3 Expansion)
  • Operation up to 60 Hz / 6 ms 2.5 A pulse length
  • Adjustable LED current
  • Adjustable pulse rate and duty cycle
  • 12-bit ADC for current measurement
  • Temperature range operational: −20 °C to +60 °C

Find more information on this adapter on the proFRAME Blog:
New for proFRAME: the LED Driver Adapter ledAD3

Product

ledAD3 Expansion

Expansion LED adapter plug-in module for the installation on a Base LED adapter plug-in module ledAD3 Base. Designed for use as power source for an illumination LED in sync with a second camera that is connected to a camera adapter module (camAD3) on the same Base Board.

  • One of up to 2 independent LED driver interfaces (ledAD3 Base + ledAD3 Expansion)
  • Operation up to 60 Hz / 6 ms 2.5 A pulse length
  • Adjustable LED current
  • Adjustable pulse rate and duty cycle
  • 12-bit ADC for current measurement
  • Temperature range operational: −20 °C to +60 °C

Find more information on this adapter on the proFRAME Blog:
New for proFRAME: the LED Driver Adapter ledAD3

Product

proFRAME 3.0 Thunderbolt 3 Box

The proFRAME 3.0 Thunderbolt 3 Box and a Thunderbolt 3 port on your PC or notebook allow your proFRAME to be used with host systems that do not have a free PCIe slot.

  • External Connectors
    • 2× Thunderbolt 3
    • 12V Power
  • Internal Connectors
    • 6-pin Mini-Fit Jr. (same type as on legacy Mac Pro motherboard; provides power for PCIe card that requires supplemental power)
  • Expansion Slots
    • 1× PCIe 3.0 x8 mechanical (x4 electrical)
    • 2× PCIe 3.0 x8 mechanical (x8 electrical)
  • Dimension (WxHxD)
    • 5 × 11 × 4.6 in. (16.5 × 27.9 × 11.7 cm)
  • Weight
    • 3.7 lbs. (1.7 kg)

Find more information on this product on the proFRAME Blog:
Turn your proFRAME PCIe plug-in card into a portable desktop device for mobile use!