Automotive
Imaging
Medical
Industrial

  • SX proFRAME – Camera adapters

Trade Shows
MedtecLIVE, Stuttgart, May 3–5, 2022 > to the websiteembedded world, Nuremberg, June 21–23, 2022 > to the website
You are here: > > > Camera Adapters

Camera Adapters

SX proFRAME camera adapters contain the interface to the camera and are mounted on the respective SX proFRAME Base Board.  The adapters are available in many variants, both for GMSL 1/2/3 and FPD-Link III/IV with the common (de)serializers (Maxim, Texas Instruments) to ensure compatibility with the various camera types. Additional camera adapters, e.g., for GigE Vision, Camera Link etc. are available on request.

Camera adapters for SX proFRAME 3.0

FPD-Link IV:

FPD-Link III:

GMSL3:

GMSL2:

Camera adapters for SX proFRAME 2.0

For SX proFRAME Base Board 2.0

FPD-Link III:

GMSL:

For SX proFRAME Base Board 2.0 LVDS

GMSL2:

For SX proFRAME Base Board 2.0 HS

CoaXPress:

Product

SX camAD3 DUAL TI9702

Art. No. 501067

  • 2× Texas Instruments DS90UB9702-Q1

    CSI-2 FPD-Link IV quad deserializer

  • 4× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request

Product

SX camAD3 DUAL TI953/954

Art. No. 501043

  • 2× Texas Instruments DS90UB953-Q1

    CSI-2 FPD-Link III dual serializer

  • 2× Texas Instruments DS90UB954-Q1

    CSI-2 FPD-Link III dual deserializer

  • 2× camera output on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 2× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL TI954

Art. No. 500965

  • 2× Texas Instruments DS90UB954-Q1

    CSI-2 FPD-Link III dual deserializer

  • 4× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX96792A

Art. No. 501068

  • 2× Maxim MAX96792A

    CSI-2 GMSL3 dual deserializer

  • 4× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX96793/96792A

Art. No. 501066

  • 2× Maxim MAX96793

    CSI-2 GMSL3 serializer

  • 2× Maxim MAX96792A

    CSI-2 GMSL3 dual deserializer

  • 2× camera output on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 2× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX9295A/9296A

Art. No. 501020

  • 2× Maxim MAX9295A

    CSI-2 GMSL2 serializer

  • 2× Maxim MAX9296A

    CSI-2 GMSL2 dual deserializer

  • 2× camera output on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 2× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX9296A

Art. No. 500920

  • 2× Maxim MAX9296A

    CSI-2 GMSL2 dual deserializer

  • 4× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX96705/96706

Art. No. 501069

  • 2× Maxim MAX96705

    CSI-2 GMSL2 serializer

  • 2× Maxim MAX96706

    CSI-2 GMSL2 deserializer

  • 2× camera output on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 2× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX96717/96716A

Art. No. 501044

  • 2× Maxim MAX96717

    CSI-2 GMSL2 serializer

  • 2× Maxim MAX96716A

    CSI-2 GMSL2 dual deserializer

  • 2× camera output on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 2× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD3 DUAL MAX96716A

Art. No. 501010

  • 2× Maxim MAX96716A

    CSI-2 GMSL2 dual deserializer

  • 4× camera input on Rosenberger FAKRA connectors Power over Coax (PoC), 5 to 24 V, 300 mA, external supply for PoC voltage supported
  • 4 CSI-2 interfaces to base board
  • Lattice MachXO3 management FPGA
  • Lock/Error status LEDs
  • Reference clock synchronization from base board
  • FSYNC trigger synchronization from base board
  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI913/914

Art. No. 500611

  • Texas Instruments DS90UB913A-Q1

    FPD-Link III serializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • Texas Instruments DS90UB914A-Q1

    FPD-Link III deserializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • Camera input & output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL TI914

Art. No. 500626

  • 2x Texas Instruments DS90UB914A-Q1

    FPD-Link III deserializer with bidirectional control channel, 25 to 100 MHz, 10 and 12 bit

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC, 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI925/926

Art. No. 500637

  • Texas Instruments DS90UB925Q-Q1

    24-bit color FPD-Link III serializer with bidirectional control channel, 5 to 85 MHz

  • Texas Instruments DS90UB926Q

    24-bit color FPD-Link III deserializer with bidirectional control channel, 5 to 85 MHz

  • Camera input and output on RosenbergerHSD plugs (D4S20G-400A5-Z)
  • Matching base boards:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI933/934

Art. No. 500640

  • Texas Instruments DS90UB933-Q1

    FPD-Link III serializer for 1 MP/60 fps and 2 MP/30 fps cameras, 12-bit 100 MHz

  • Texas Instruments DS90UB934-Q1

    FPD-Link III deserializer for 1 MP/60 fps and 2 MP/30 fps cameras, 12-bit 100 MHz

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI935/936

Art. No. 500862

  • Texas Instruments DS90UB935-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3 Gbit/s

  • Texas Instruments DS90UB936-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI936

Art. No. 500873

  • Texas Instruments DS90UB936-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL TI953

Art. No. 500639

  • 2× Texas Instruments DS90UB953-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3.2 Gbps

  • 2× camera output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI953/954

Art. No. 500657

  • Texas Instruments DS90UB953-Q1

    MIPI CSI-2 FPD-Link III serializer for 2 MP/60 fps cameras and RADAR, up to 3.2 Gbps

  • Texas Instruments DS90UB954-Q1

    MIPI CSI-2 FPD-Link III dual deserializer for 2 MP/60 fps cameras and RADAR

  • Kamera-Eingang und Ausgang auf Rosenberger-FAKRA-Steckern (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD TI954

Art. No. 500685

  • Texas Instruments DS90UB954-Q1

    Dual MIPI CSI-2 FPD-Link III deserializer for 2 MP/60 fps cameras and RADAR

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice MachXO3 FPGA (MachXO3LF-4300)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL MAX9240A

Art. No. 500628

  • 2× Maxim MAX9240A

    25-bit GMSL deserializer, 6.25 to 100 MHz, with line fault detect

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9240A/9271

Art. No. 500631

  • Maxim MAX9240A

    25-bit GMSL deserializer, 6.25 to 100 MHz, with line fault detect

  • Maxim MAX9271

    16-bit GMSL serializer, 6.25 to 100 MHz

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96705/96706

Art. No. 500683

  • Maxim MAX96705

    16-bit GMSL serializer with high-immunity/bandwidth mode

  • Maxim MAX96706

    14-bit GMSL deserializer

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA

  • Lattice MachXO2 FPGA (XO2-1200U)

    for interfacing with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9295A/9296A

Art. No. 500798

  • Maxim MAX9295A

    MIPI CSI-2 GMSL2 serializer with pixel mode, up to 6 Gbps

  • Maxim MAX9296A

    MIPI CSI-2 GMSL2 dual deserializer with pixel mode, up to 6 Gbps

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX9296A

Art. No. 500783

  • Maxim MAX9296A

    MIPI CSI-2 GMSL2 dual deserializer with pixel mode, up to 6 Gbps

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96716A/96717

Art. No. 500978

  • Maxim MAX96716A

    MIPI CSI-2 GMSL2 dual deserializer with tunneling mode, up to 6 Gbps

  • Maxim MAX96717

    MIPI CSI-2 GMSL2 serializer with tunneling mode, up to 6 Gbps

  • Camera input and output on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Pixel clock generator

    for playback

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD MAX96716A

Art. No. 500946

  • Maxim MAX96716A

    MIPI CSI-2 GMSL2 dual deserializer with tunneling mode, up to 6 Gbps

  • 2× camera input on Rosenberger FAKRA plugs (59S2AQ-40MT5-Z_1)

    Power over Coax (PoC), 5 to 10 V, 300 mA, external supply for PoC voltage supported

  • Lattice CrossLink FPGA (LIF-MD6000)

    for image data interfacing with the grabber board

  • Lattice MachXO3 FPGA

    for GPIO and frame synchronization with the grabber board

  • I2C serial EEPROM

    for link configuration and camera simulation

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD CoaXPress

Art. No. 500721

  • Microchip EQCO31R20
    • Coaxial cable video equalizer for bidirectional communication
    • 1.25 to 3.125 Gbps video downlink
    • Supports 8b/10 NRZ coding and the CoaXPress standard
  • Camera input on coax connector (Cinch Connectivity Solutions UCBJE20-1)

    Power over Coax (PoC), 18 V, 1 A

  • Atmel ATtiny85 microcontroller

    for control of Power over Coax (PoC) supply voltage

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
Product

SX camAD DUAL CoaXPress

Art. No. 500722

  • 2× Microchip EQCO62R20
    • Coaxial cable video equalizer for bidirectional communication
    • 1.25 to 3.125 Gbps video downlink
    • Supports 8b/10 NRZ coding and the CoaXPress standard
  • 2× camera input on coax connectors (Cinch Connectivity Solutions UCBJE20-1)

    Power over Coax (PoC), 18 V, 1 A

  • 2× Atmel ATtiny85 microcontroller

    for control of Power over Coax (PoC) supply voltage

  • Matching accessories:
    • Cable set for SX proFRAME, various lengths on request
You are here: > > > Camera Adapters